Angelwax | Enigma Legacy Wheel & Caliper

Angelwax ENIGMA LEGACY WHEEL & CALIPER, a user-friendly titanium ceramic coating specially crafted for alloy wheels and brake calipers. ENIGMA LEGACY WHEEL & CALIPER is designed with simplicity in mind, catering to both professional detailers and automotive enthusiasts. It's a remarkable coating for wheels and calipers, and the application takes just minutes.

Unlike traditional ceramic coatings, Angelwax ENIGMA LEGACY WHEEL & CALIPER doesn't require curing with infrared lighting. Once applied, it forms a protective shield over the surface, safeguarding it against harmful contaminants and fallout. This not only simplifies cleaning and maintenance but also maintains an enduring shine.

Directions:

1. Thoroughly clean each wheel and caliper using BILBERRY WHEEL CLEANER or REVELATION, ensuring the surfaces are entirely free of contaminants. For optimal results, polish the wheels and calipers to a high gloss finish using either REDEMPTION or PERFECT POLISH before application. Always apply ceramic products in a sheltered environment.

2. Remove the cap from the bottle and dispense a few drops of ENIGMA LEGACY WHEEL & CALIPER onto a microfiber applicator or a suede applicator cloth used in combination with the Angelwax foam block. Apply the coating to one wheel/caliper at a time.

3. After coating a wheel/caliper, allow the coating to cure onto the surface for 2 minutes.

4. Remove any residue with a clean, dry microfiber cloth. To achieve a high gloss finish, use a buffing towel.

Note: The two-minute curing time is based on an approximate temperature of 20°C (68°F). Colder temperatures may extend curing time, while warmer conditions may expedite it.

Pro Tip: If possible, refrain from using the vehicle for approximately 2 to 4 hours after applying the coating. This allows the crosslink density of the coating to increase, maximizing surface properties and enhancing durability.